Lay the screen at 45 °C on the rubber frame, spray the screen with a watering can, then scrape the water with a spatula to prevent the presence of blisters; roll the water film to make the medicine face outward. Then carefully attach the medicine surface to the printing surface (convex surface) on the screen. After attaching it, spray the water on the ink surface (concave surface) with a watering can, so that the water film is completely wet, no white is visible, and then evenly scraped with a spatula. Gently press the water out on the printing surface (convex surface), then use the scraper to the ink surface (concave surface) to gently scrape out the excess water, and finally use the vacuum cloth to absorb the excess water in the frame. Dry, at this point, the filming process is completed.
