1. Pre-network processing and network selection
The new screen must be pre-treated with a netting paste before use. Each screen must be completely degreased with a degreaser. The specific method is to wet both sides of the screen with water, apply a netting paste or degreaser, and then use Brush the brush evenly and let stand for 1 minute, then rinse off with water.
If the used net is no longer used, it can be soaked with a release agent, then cleaned, and must be degreased before use.
After the screen is cleaned, the drying process is ready for use. The network maker can select the network according to the required mesh number: the screen printing line is generally 120T/cm, the soldering resistance is 100-120T/cm, the character is 100-120T/cm, the carbon bridge oil is 43-120T, and the stripping stripping gel is printed. 18-36T.
