Semi-automatic screen printing machine maintenance should be carried out at regular intervals, insisting on maintenance of the equipment, which can extend the service life of the equipment and ensure a safe and comfortable working environment. Its main content should include:
First, the semi-automatic screen printing machine should be neat, clean, sturdy, lubricated, anti-corrosive, safe, etc., the working content, working methods, tools and materials used, standards and precautions.
1. The equipment operator should first check whether the air source and power supply of the equipment are normal after going to work every day. Then start the machine and let the machine idle for 3 to 5 minutes. Listen carefully to the machine for abnormal noise. If abnormality is found, it must be excluded. working. The screws that must be locked must be fastened before the machine is operated.
2, the on-duty personnel must ensure that the machine is complete, there are corrosion or flammable items can not be placed on the surface of the machine, the ink and debris on the equipment should be cleaned up.
3. Send special personnel to add lubricant to the moving parts of the machine regularly. Pneumatic machines should remove the accumulated water inside the filter every day to ensure that the air source is dry and place the accumulated water to run into the pneumatic parts.
Second, semi-automatic screen printing machine electrical parts maintenance.
The structure of the domestic semi-automatic screen printing machine is divided into the table lifting and the left and right sliding of the wire mesh frame. Here, the simple maintenance method for the common faults of the pneumatic semi-automatic screen printing machine is briefly introduced.
1. Press the start button. The workbench has no action failure. First, we check whether the air supply of the machine is connected, whether the lift solenoid valve is damaged, and if it is damaged, it can be replaced.
2. The workbench has been raised, and the wire mesh frame has no action: first check whether the workbench lift sensor has sensed the signal output, and after checking the fault, check whether the solenoid valve on the left and right of the control wire mesh frame is damaged or blocked. Clearing the above two faulty machines should be able to take the next step.
3, the machine has completed the printing list can not be returned to the ink, the workbench can not return to the original position to issue an alarm: Or first check whether the sensor on the right side of the wire mesh frame is sensed or damaged, the machine can be normal work after troubleshooting.
If you want to extend the life of the semi-automatic screen printing machine, you must ensure regular maintenance of the semi-automatic screen printing machine, and understand the elimination of the semi-automatic screen printing machine. To extend the life of the semi-automatic screen printing machine, you should also choose a semi-automatic screen printing machine with good material quality.
