< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=9514180&fmt=gif" />

Discussion on the problem of fading of silk screen printing plastic bottles

Jan 17, 2020

Leave a message

Due to the variety of bottle materials, sometimes some plastic bottle designs are easy to fade after printing with a curved machine. The following is a discussion about the problem of screen printing plastic bottle fade.

1. It can be processed by flame processor before printing, or it can be processed by corona treatment or plasma treatment machine. The effect is better, the efficiency is high, and it is clean and energy saving.

2. Depending on the material of the bottle, PP, PE, PET, and ink types can also be treated differently. Generally, it is best to use a flame surface treatment for PP / PE plastic bottles before silk printing, so that its surface tension is increased, which can enhance the adhesion of the ink; see the effect of the treatment, the treated bottle can be put into water, and the treated place is attached with water It is very smooth, and the untreated place is not smooth with water droplets. Adjust the best processing operation according to this principle.

3. It can also be wiped with PP water, but the cost is higher.


Send Inquiry
Contact us if have any question

We sincerely hope you can join us and enjoy our excellent quality, continuous innovation and best service.

Contact now!